Automatic Sump/Effluent Pump w/ Vertical Float Switch, 1/3HP, 115V, 10' cord
The 257 from Liberty Pumps is an Automatic Sump/Effluent Pump w/ Vertical Float Switch, 1/3HP, 115V, 10' cord. Turn-on level of the not adjustable switch is 7" and turn-off level is 3-1/2". This pump can operate in a smaller 10" diameter sump pit.
The Liberty Pumps 257 has 1-1/2" NPT discharge, 1/2" solids-handling, 18' shut-off head, a unique one-piece cast iron housing and thermally protected & permanently lubricated motor.
For Sump and De-watering Applications only. This Vertical Magnetic Float (VMF) model is not recommended for effluent applications due to their short On/Off cycle. Wide angle float models (Liberty Pumps 251 and 253) are better suited for effluent applications and are easily adjustable for different On/Off levels.
For added protection, consider the addition of a back-up pump such as Liberty's SJ10 SumpJet, as well as an alarm such as Liberty's ALM-2 in applications where loss of pump function could result in property damage. If an alarm is used, it must be connected to a separate electrical circuit.
CAUTION: Do not let the pump run dry.
Features:
- Rugged 1/3 HP motor, oil filled with thermal overload protection;
- 1/2" solids handling;
- 1-1/2" discharge;
- Hermetically sealed motor and switch cavities, and permanently lubricated bearings;
- Liberty's UNI-BODY casting - a solid, onepiece housing that eliminates the lower motor seal ring found on other pumps;
- Epoxy powder coat finish;
- Vortex style impeller for superior solids-handling. Made of high temperature engineering polymer;
- Quick-disconnect 10' standard power cord allows replacement of cord in seconds without breaking seals to motor;
- Fasteners - all non-corrosive stainless steel;
- 416 stainless steel rotor shaft;
Technical Specifications:
- Horsepower: 1/3 HP;
- Cord length: 10';
- Discharge: 1-1/2";
- Solids Handling: up to 1/2";
- Shut-off Head: 18';
- Voltage: 115V;
- Amps: 5.2;
- Hertz: 60 Hz;
- Phase: 1;
- Maximum fluid temperature: 140°F;
- Height: 10.5";
- Width: 9.6";
- Weight: 23 lbs.;
- Minimum pit/basin diameter: 14" in Sump and 18" in Effluent applications;
- Minimum pit/basin depth: 18" in Sump and 24" in Effluent applications;
Warranty:
- 3 years manufacturer's warranty
Product Specs | |
Amps: | 5.2 |
Cord Length: | 10' |
Discharge: | 1-1/2" |
Height | 10.5" |
Hertz: | 60 Hz |
Horsepower: | 1/3 HP |
Maximum Fluid Temperature: | 140°F |
Phase: | 1 |
Shut-off Head: | 18' |
Solids Handling: | up to 1/2" |
Voltage | 115V |
Weight: | 23 lbs. |
Width | 9.6" |