Magnetic Drive Pump for Semi Corrosive, 1/25HP, 115V

Magnetic Drive Pump for Semi Corrosive, 1/25HP, 115V
Magnetic Drive Pump for Semi Corrosive, 1/25HP, 115V QR Code
Views: 3009 Product Code: 580503
UPC: 010121805033

MPN: 580503


Weight:6.00 lb

Dimensions (L x W x H ): 12.00 x 7.00 x 7.00

Usually ships: 1 business days
4 or more $160.95
Qty: Add to Cart


Have any questions?
Contact us at 1-800-246-9552

The 580503 from Little Giant is a Magnetic Drive Pump for Semi-Corrosive, 1/25HP, 115V. Designed for in-line, non-submersed use.

Little Giant MD-SC Magnetic Drive Pumps feature 6ft power cord, leakproof, seal-less magnetic drives, 99.5% pure alumina ceramic shaft and thrust washers. Volute, magnet housing and impeller are glass-filled polypropylene for excellent chemical resistance. Spindle shaft is supported at both ends to prevent impeller damage during start-up and stop of pump.

The Little Giant 2-MD-SC has 1/2" FNPT Intake and 1/2" MNPT Discharge.


  • Specific Gravity up to 1.1';
  • Thermally protected, open, fan-cooled motor;
  • 6' power cord with 3-prong plug;
  • Sleeve bearings;
  • Ambient Air Temperature up to 77F;
  • Fluid Temperature up to 150F.

Technical Specifications:

  • Horsepower: 1/25HP;
  • Flow: 510 @ 1' of Head;
  • Cord Length: 6';
  • Shut Off Head: 14.6';
  • Voltage: 115V;
  • Intake: 1/2" FNPT;
  • Discharge: 1/2" MNPT;
  • Hertz: 50/60Hz;
  • Watts: 109W;
  • Weight: 6.25 lbs;
  • Height: 5";
  • Width: 4";
  • Length: 8.9";
  • Certification: UR/C-CSA.
Product Specs
Amperage: 1.43
Application: Mild to Strong Acids
Capacity (Gallons): 8.5
Cord Length: 6 Feet
Dimensions: 5"H x 4"W x 8.9"L
Flow at 1 FT Head: 510 GPH
Hertz: 50/60
Horse Power: 1/25
RPM: 2900
Shutoff Head (ft.): 14.6'
Voltage: 115v
Wattage: 109
Weight (lbs): 6.25 lbs
There are no reviews for this product.

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: