Automatic Sump/Effluent Pump w/ Vertical Float Switch, 10' cord, 1/2HP, 115V

The 287 from Liberty Pumps is an Automatic Sump/Effluent Pump w/ Vertical Float Switch, 10' cord, 1/2HP, 115V. Turn-on level of the not adjustable switch is 9-1/2" and turn-off level is 4". This pump can operate in a smaller 10" diameter sump pit.

The Liberty Pumps 287 has 1-1/2" NPT discharge, 3/4" solids-handling, 37' shut-off head, a unique one-piece cast iron housing and thermally protected & permanently lubricated motor.

Liberty Pumps 287 is a 1/2HP Automatic Submersible Sump Pump with with magnetically operated vertical float VMF switch and 10ft power cord. Turn-on level of the not adjustable switch is 9-1/2" and turn-off level is 4". This pump can operate in a smaller 10" diameter sump pit.

The Liberty Pumps 287 has 1-1/2" NPT discharge, 3/4" solids-handling, 37' shut-off head, a unique one-piece cast iron housing and thermally protected & permanently lubricated motor. 

For Sump and De-watering Applications only. This Vertical Magnetic Float (VMF) model is not recommended for effluent applications due to their short On/Off cycle. Wide angle float models (Liberty Pumps 281 and 283) are better suited for effluent applications and are easily adjustable for different On/Off levels.

For added protection, consider the addition of a back-up pump such as Liberty's SJ10 SumpJet, as well as an alarm such as Liberty's ALM-2 in applications where loss of pump function could result in property damage. If an alarm is used, it must be connected to a separate electrical circuit.

CAUTION: Do not let the pump run dry.

Features:

• Vortex style impeller permitting passage of solids up to 3/4";
• 416 stainless steel rotor shaft;
• Permanently lubricated upper and lower ball bearing;
• Carbon and ceramic mechanical face seal;
• Epoxy powder coat finish;
• All fasteners - corrosion-resistant stainless steel;
• 1-1/2" Discharge;
• Stainless steel bottom screen - easily removable;
• Quick-disconnect 10' standard power cord;
• Maximum fluid temperature: 140°F;

Technical Specifications:

• Horsepower: 1/2 HP;
• Cord length: 10';
• Discharge: 1-1/2";
• Solids Handling: up to 3/4";
• Shut-off Head: 37';
• Voltage: 115V;
• RPM: 3450;
• Amps: 8.5;
• Hertz: 60 Hz;
• Phase: 1;
• Maximum fluid temperature: 140°F;
• Height: 13";
• Width: 10";
• Weight: 29 lbs.;
• Minimum sump pit diameter: 10";
• Minimum sump pit depth: 14";

Warranty:

• 3 years manufacturer's warranty