1” Sweat Zone Valve w/ End Switch, 18” leads
Click Image for Gallery
The V8043E1020 from Honeywell is a 1” Sweat Zone Valve w/ End Switch, 18” leads. It consists of a motorized actuator and valve assembly for controlling the flow of hot water to a heat exchanger such as a radiator, convector, finned baseboard radiator, or infloor radiant coil for space temperature control. The V8043 5000 series valves provide two-position, straight through control of supply water at up to 300 psi operating pressure.
Applications:
- Hydronic Control. Use this valve in closed loop hydronic systems that do not contain dissolved oxygen in system water, such as fresh water from frequent source of makeup water.
- Valve designed for cycling (not constantly powered on) applications;
Features:
- Manual opener (on all models, except straight-through, normally open valves) for valve operation on power failure
- valve returns to automatic position when power is restored
- Compact construction for easy installation
- Approvals of Underwriters Laboratories Inc (UL Component Listed: File MH11826 Vol. 1)
- Actuator motor may be replaced without removing the valve body or draining the system
- May be installed without disassembling the valve
- Complete powerhead may be removed or replaced without breaking plumbing line connections or draining the system
Technical Specifications:
- Connection Type: Sweat
- Pipe Size (inch): 1"
- Pipe Size (DN): DN25
- Body Pattern: Two-way, Straight-through
- Capacity (Cv): 3.5 Cv
- Capacity (Kv): 3 Kv
- De-energized Position: Normally Closed
- Maximum Close-off Pressure (psi): 20 psi
- Fluid Temperature Range: 50 F to 200 F
- Electrical Connections: 18" leads
- Power Consumption: 7.7 VA
- Nominal Timing: 15 sec
- Valve Action: Spring return to close
- Maximum Ambient Temperature: 125 F
- Dimensions: 4" high x 3-1/2" wide x 2-3/8" deep
- Type: 2 position
- Auxiliary End Switch: SPST
- End Switch Rating: 50 VA pilot duty @ 24 V
- Static Pressure (psi): 125 psi
- Materials (Body): Brass
- Materials (Stem): Stainless Steel
- Materials (Ball Plug): Buna-N (NBR) Rubber Ball
- Materials (Packing O-rings): EPDM O-rings
- Voltage: 24V
- Manual Opener: Yes
- Tradeline Value: Tradeline
Product Specs | |
Amperage: | 0.3 |
Application | Zoning |
Body Pattern: | 2-Way |
Connection Type | Sweat |
Depth (Inches): | 2-3/8" |
End Switch: | Yes |
Flow Capacity (Cv): | 3.5 |
Height | 4" |
Hertz: | 59 |
Material1 | Brass |
Max Ambient Temp (°F): | 125°F |
Max Close-Off PSI: | 20 psi |
Max Pressure (PSI): | 300 |
Max Temp. | 200°F |
Min Temp. | 50°F |
Position: | Normally Closed |
Size1 | 1" |
Temperature Range (F): | 50°-200°F |
Voltage | 24v |
Width | 3-11/16" |
Wiring: | 18" Leads |