1” Press Zone Sentry Zone Valve, Normally Closed

1” Press Zone Sentry Zone Valve, Normally Closed
1” Press Zone Sentry Zone Valve, Normally Closed QR Code
Views: 4425 Model: Z100P2-1

MPN: Z100P2-1


Weight:2.00 lb

Dimensions (L x W x H ): 4.80 x 6.50 x 2.80

Usually ships: 1 business day(s)
Qty: Add to Cart


Have any questions?
Contact us at 1-800-246-9552

The Z100P2-1 from Taco is a 1” Press Zone Sentry Zone Valve, Normally Closed. It's a motorized Zone Sentry series zone valve with 1" copper press connections.


  • Sentry zone valve series is a market leader in efficiency, durability, ease of installation, pressure and flow characteristics;
  • For use in radiant, baseboard, fan coil, heat pump, air handlers and convector applications;
  • Valve can be installed in any direction;
  • Actuator can be mounted in either direction, simplifying installation in tight spaces;
  • Terminal block connections allow to quick and easy wiring hookup;
  • Manual override button;
  • LED status indicator.

Technical Specifications:

  • Connections: 1" Press;
  • Valve Default Position: Normally Closed;
  • Max Operating Pressure: 300 psi;
  • Max Shut off Pressure: 125 psi;
  • Max Ambient Temperature: 135°F;
  • Fluid Temperature Range: 20 - 220°F;
  • Electrical Rating: 24 VAC, 60 Hz, 0.48 Amps;
  • Power Consumption (charging): 11.4W, 0.48 Amps;
  • Power Consumption (Power On): 1.44W, 0.06 Amps;
  • Heat Anticipator Setting: 0.5 Amps;
  • End Switch Rating: 1 Amp @ 24 VAC.
Product Specs
Connections:1" Press
Electrical Rating:24 VAC, 60 Hz, 0.48 Amps
End Switch Rating:1 Amp @ 24 VAC.
Fluid Temperature Range:20 - 220°F
Heat Anticipator Setting:0.5 Amps
Max Ambient Temperature:135°F
Max Operating Pressure:300 psi
Max Shut off Pressure:125 psi
Power Consumption (Charging):11.4W, 0.48 Amps
Power Consumption (Power On):1.44W, 0.06 Amps
Valve Default Position:Normally Closed
There are no reviews for this product.

Write a review

Your Name:

Your Review:Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: