3" TestTitan, Pipe/FIP Cleanout Mechanical Test Plug

3" TestTitan, Pipe/FIP Cleanout Mechanical Test Plug
3" TestTitan, Pipe/FIP Cleanout Mechanical Test Plug QR Code
Views: 6032 Model: 882-3

MPN: 882-3


Weight:5.40 lb

Dimensions (L x W x H ): 3.50 x 3.50 x 4.00

Usually ships: 1 business day(s)
Qty: Add to Cart


Have any questions?
Contact us at 1-800-246-9552

The 882-3 from Sioux Chief is a 3” TestTitan, Pipe/FIP Cleanout Mechanical Test Plug. It's designed for DWV pressure testing in PVC, ABS and Cast Iron drainage and vent systems. Suitable for installation inside 3" Schedule 40 (only) PVC pipe, ABS pipe and Cast Iron no-hub pipe, as well as inside FIP (standard female threaded) cleanout - no special adapter needed. Drill or cut off tip to make a hole and connect standard garden hose for water pressure testing where needed.

Warning: as with all pressure testing equipment, follow all applicable codes/procedures, manufacturer recommendations and wear safety gear when performing DWV drain tests. Stay clear of the test tees, cleanouts and pipe ends while system is under pressure.


  • Reusable - easy installation and removal;
  • For use in both pipe end (barrel/inside) and FIP cleanout threads;
  • Use a 9/16" drill bit or cut off the tip to access the hollow stem;
  • Hollow, 3/4" male hose thread stem allows to fill/drain through the plug. Connects to a standard garden hose;
  • Consists of polypro wingnut, ABS disc, ABS stem and soft PVC gasket;
  • Non-slip shoulder prevents spinning;
  • 1" wide gasket vs 0.5" in competition;
  • Made from 100% corrosion proof material.

Technical Specifications:

  • Size: for 3" PVC (Sch. 40), ABS, Cast Iron pipe or FIP cleanout;
  • Stem, base and disc material: ABS;
  • Nut material: PolyPro;
  • Gasket material: soft PVC;
  • Safe working loads (for pipe): 20 PSI;
  • Safe working loads (for cleanout): 20 PSI;
  • Overall Diameter: 3.5";
  • Overall Depth: 3.7".
Product Specs
Gasket material:soft PVC
Nut material:PolyPro
Overall Depth:3.7".
Overall Diameter:3.5"
Safe working loads (for cleanout):20 PSI
Safe working loads (for pipe):20 PSI
Stem, base and disc material:ABS
There are no reviews for this product.

Write a review

Your Name:

Your Review:Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: