1-1/2" TestTitan, Pipe/FIP Cleanout Mechanical Test Plug

1-1/2" TestTitan, Pipe/FIP Cleanout Mechanical Test Plug

1-1/2" TestTitan, Pipe/FIP Cleanout Mechanical Test Plug QR Code
QR-Code
Product Code: 882-1

Availability: Out Of Stock

Weight:0.20 lb



Usually ships: Upon availability
$2.15
10 or more $2.04
Qty: Add to Cart

Have any questions?
Contact us at 1-800-246-9552

TestTitan plug is designed for DWV pressure testing in PVC, ABS and Cast Iron drainage and vent systems. Suitable for installation inside 1-1/2" Schedule 40 (only) PVC pipe, ABS pipe and Cast Iron no-hub pipe, as well as inside FIP (standard female threaded) cleanout - no special adapter needed. Drill or cut off tip to make a hole and connect standard garden hose for water pressure testing where needed.

Warning: as with all pressure testing equipment, follow all applicable codes/procedures, manufacturer reccommendations and wear safety gear when performing DWV drain tests. Stay clear of the test tees, cleanouts and pipe ends while system is under pressure.


Features:

  • Reusable - easy installation and removal;
  • For use in both pipe end (barrel/inside) and FIP cleanout threads;
  • Use a 9/16" drill bit or cut off the tip to access the hollow stem;
  • Hollow, 3/4" male hose thread stem allows to fill/drain through the plug. Connects to a standard garden hose;
  • Consists of polypro wingnut, ABS disc, ABS stem and soft PVC gasket;
  • Non-slip shoulder prevents spinning;
  • 1" wide gasket vs 0.5" in competition;
  • Made from 100% corrosion proof material.

Technical Specifications:

  • Size: for 1-1/2" PVC (Sch. 40), ABS, Cast Iron pipe or FIP cleanout;
  • Stem, base and disc material: ABS;
  • Nut material: PolyPro;
  • Gasket material: soft PVC;
  • Safe working loads (for pipe): 40 PSI;
  • Safe working loads (for cleanout): 40 PSI;
  • Overall Diameter: 1.9";
  • Overall Depth: 3.7".
Product Specs
Gasket material:soft PVC
Nut material:PolyPro
Overall Depth:3.7".
Overall Diameter:1.9"
Safe working loads (for cleanout):40 PSI
Safe working loads (for pipe):40 PSI
Stem, base and disc material:ABS
There are no reviews for this product.

Write a review

Your Name:


Your Review:Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Loading...
Loading...
Loading...