Automatic Effluent Pump w/ Wide Angle Float Switch, 6/10HP, 25' cord, 208/240V
Click Image for Gallery
The FL62A-2 from Liberty Pumps is an Automatic Effluent Pump w/ Wide Angle Float Switch, 6/10HP, 25' cord, 208/240V. It's equipped with a mercury-free switch that has a piggy-back plug for manual bypass Operation. The switch has a turn-on level of 12" and turn-off level of 5". Semi-open impellers, on the Liberty FL62A-2, permit the passage of 1/2" solids without clogging. This effluent sump pump has a discharge of 1-1/2"FNPT.
The Liberty Pump FL62A-2 automatic submersible sump/effluent pump is ideal for high-head applications and has a shut-off head of 63'. These effluent sump pumps are designed for STEP systems, liquid waste transfer and higher head de-watering applications.
Features:
- Semi-open impeller permits passageof solids without clogging;
- Cast iron construction with all stainless and brass fasteners;
- 416 stainless steel rotor shaft;
- Oil-filled, hermetically sealed motors with thermal overload protection;
- Permanently lubricated upper and lower ball bearings;
- Unitized, carbon and ceramic shaft seal;
- Single float, mercury-free level control with series plug for manual bypass Operation - standard on automatic models;
- Adjustable pumping range;
- 1-1/2" FNPT discharge;
- Quick-disconnect 25' standard power cord allows replacement of cord in seconds without breaking seals to motor;
Technical Specifications:
- Horsepower: 6/10 HP;
- Cord length: 25';
- Discharge: 1-1/2" FNPT;
- Solids Handling: up to 1/2";
- Shut-off Head: 63';
- Voltage: 208-230V;
- Amps: 7;
- Hertz: 60 Hz;
- Phase: 1;
- Maximum fluid temperature: 140°F;
- Height: 13.75";
- Width: 10.25";
- Weight: 57 lbs.;
- Minimum pit/basin diameter: 14" in Sump and 18" in Effluent applications;
- Minimum pit/basin depth: 18" in Sump and 24" in Effluent applications;
Product Specs | |
Cord Length: | 25' |
Horse Power | 6/10 |
Shutoff Head (ft.): | 63 |
Type1 | Automatic |
Voltage | 208v |