Magnetic Drive Pump for Highly Corrosive, 1/12HP, 115V

Magnetic Drive Pump for Highly Corrosive, 1/12HP, 115V
Magnetic Drive Pump for Highly Corrosive, 1/12HP, 115V QR Code
Views: 6488 Model: 581603
UPC: 010121816039

MPN: 581603


Weight:9.00 lb

Dimensions (L x W x H ): 12.00 x 7.00 x 7.00



Have any questions?
Contact us at 1-800-246-9552

The 581603 from Little Giant is a Magnetic Drive Pump for Highly Corrosive, 1/12HP, 115V. Designed for in-line, non-submersed use.

Little Giant MD-HC Magnetic Drive Pumps feature 6ft power cord with 3-Prong Plug, leakproof, seal-less magnetic drives, 99.5% pure alumina ceramic shaft and thrust washers for excellent wear and trouble-free service. Spindle shaft is supported at both ends to prevent impeller damage during start-up and stop of pump. For excellent chemical resistance, volute, magnet housing and impeller of this Little Giant Magnetic Drive Pump are glass-filled Ryton polypropylene.

The Little Giant 3-MD-HC has 3/4" FNPT Intake and 1/2" MNPT Discharge.


  • Specific Gravity up to 1.1;
  • Thermally protected, open, fan-cooled motor;
  • 6' power cord with 3-prong plug;
  • Sleeve bearings;
  • Ambient Air Temperature up to 77F;
  • Fluid Temperature up to 200F.

Technical Specifications:

  • Horsepower: 1/12HP;
  • Flow: 750 @ 1' of Head;
  • Cord Length: 6';
  • Shut Off Head: 21.9';
  • Voltage: 115V;
  • Intake: 1/2" FNPT;
  • Discharge: 1/2" MNPT;
  • Hertz: 50/60Hz;
  • Watts: 180W;
  • Weight: 8.75 lbs;
  • Height: 5";
  • Width: 4";
  • Length: 8.9";
  • Certification: UR/C-CSA.
Product Specs
Amperage: 2.4
Application: Strong Acids
Capacity (Gallons): 12.5
Cord Length: 6 Feet
Dimensions: 5"H x 4"W x 8.9"L
Flow at 1 FT Head: 750 GPH
Hertz: 50/60
Horse Power: 1/12
RPM: 3100
Shutoff Head (ft.): 21.9'
Voltage: 115v
Wattage: 180
Weight (lbs): 8.75 lbs
There are no reviews for this product.

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: