Shallow Well Jet Pump w/ Pressure Switch, 3/4HP, 115/230V, Cast Iron

Shallow Well Jet Pump w/ Pressure Switch, 3/4HP, 115/230V, Cast Iron
Views: 3518 Product Code: 558275
UPC: 010121119512

MPN: 558275

Weight:41.00 lb

Dimensions (L x W x H ): 12.00 x 20.00 x 13.00

Usually ships: 5-7 business days
Qty: Add to Cart


Have any questions?
Contact us at 1-800-246-9552

The 558275 from Little Giant is a Shallow Well Jet Pump w/ Pressure Switch, 3/4HP, 115/230V, Cast Iron. It's recommended for supplying fresh water to rural homes, farms and cabins from a shallow well, suitable for installs where the vertical distance from the pump to the pumping water level does not exceed 25'.

Little Giant JP-075-C features a 1" NPT discharge with head capacity of 150' and brass flow control valve. The New Jet Pump with a 1 1/4" Suction NPT was specifically engineered to handle water transfer with high efficiency and long term dependability. Little Giant JP-075-C boasts rugged cast iron construction and precision engineered thermoplastic impeller, diffuser, nozzle and venturi for high performance and efficient water flow. Powerful O. Smith 3/4 HP, dual compartment motor, delivers 16.5 GPM of fluids at 50' (20 PSI with 5' suction lift) and has a higher than NEMA service factor. JP-075-C Shallow Well Jet Pump features a pressure gage, factory pre-set 30/50 pressure switch which produces up to 50 PSI with automatic shut-off and a stainless steel motor shaft with dual ball bearings. Heavy-duty cast iron casing and seal plate ensure years of service and reliability. The Pump should be installed at the water source or in a home, farm, or cabin to protect from freezing.


  • Cast iron casing and seal plate for durability and long life;
  • A.O. Smith higher than standard NEMA service factor dual compartment motor;
  • Dual voltage 115/230V;
  • Square D pressure switch preset at 30-50 PSI;
  • 1 1/4" suction, 1" NPT discharge and brass flow control valve;
  • Pressure gage included;
  • Stainless steel motor shaft seal and dual ball bearings;
  • Precision engineered thermoplastic impeller, diffuser, nozzle and venturi;
  • Clean-out plug to easily unclog nozzle;
  • Fully serviceable with two-year warranty;

Technical Specifications:

  • Horsepower: 3/4 HP;
  • Flow rate: 16.5 GPM @ 50' (20 PSI with 5' suction lift);
  • Shut Off @ 150' of Head;
  • Voltage: 115/230 V;
  • Hertz: 60 Hz;
  • Amps: 14.8/7.4 A;
  • Weight: 38 lbs;


  • 1 year manufacturers warranty from the date of purchase. 
Product Specs
Discharge:1" NPT
Flow at 50 FT Head:16.5 GPM
Horse Power:3/4
Shutoff Head (ft.):150'
Warranty:2 Years
Weight (lbs):38 lbs
There are no reviews for this product.

Write a review

Your Name:

Your Review:Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: