Automatic Effluent Pump w/ Wide Angle Float Switch, 1/2HP, 10' cord, 115V
The FL51A from Liberty Pumps is an Automatic Effluent Pump w/ Wide Angle Float Switch, 1/2HP, 10' cord, 115V. This sump/effluent pump is equipped with an adjustable, mercury-free switch that has a series (piggy-back) plug for manual bypass Operation. The switch has a turn-on level of 12" and turn-off level of 5". Semi-open impellers, on the Liberty FL51A, permit the passage of 1/2" solids without clogging. This effluent sump pump has a discharge of 1-1/2"FNPT.
The Liberty Pump FL51A automatic submersible sump/effluent pump is ideal for mid-range applications and has a shut-off head of 48'. These effluent sump pumps are designed for STEP systems, liquid waste transfer and higher head de-watering applications.
Features:
- Semi-open impeller permits passageof solids without clogging;
- Cast iron construction with all stainless and brass fasteners;
- 416 stainless steel rotor shaft;
- Oil-filled, hermetically sealed motors with thermal overload protection;
- Permanently lubricated upper and lower ball bearings;
- Unitized, carbon and ceramic shaft seal;
- Single float, mercury-free level control with series plug for manual bypass Operation - standard on automatic models;
- Adjustable pumping range;
- 1-1/2" FNPT discharge;
- Quick-disconnect 10' standard power cord allows replacement of cord in seconds without breaking seals to motor;
Technical Specifications:
- Horsepower: 1/2 HP;
- Cord length: 10';
- Discharge: 1-1/2" FNPT;
- Solids Handling: up to 1/2";
- Shut-off Head: 48';
- Voltage: 115V;
- Amps: 12;
- Hertz: 60 Hz;
- Phase: 1;
- Maximum fluid temperature: 140°F;
- Height: 13.75";
- Width: 10.25";
- Weight: 57 lbs.;
- Minimum pit/basin diameter: 14" in Sump and 18" in Effluent applications;
- Minimum pit/basin depth: 18" in Sump and 24" in Effluent applications;
Warranty:
- 3 years manufacturer's warranty
Product Specs | |
Cord Length: | 10 ft |
Horse Power | 1/2 |
Shutoff Head (ft.): | 48 |
Type1 | Automatic |
Voltage | 115v |