Liberty Pumps FL32A-2, 1/3 HP Automatic Effluent Pump w/ Wide Angle Float Switch, 208V ~ 240V, 25' cord

Liberty Pumps FL32A-2, 1/3 HP Automatic Effluent Pump w/ Wide Angle Float Switch, 208V ~ 240V, 25' cord
Liberty Pumps FL32A-2, 1/3 HP Automatic Effluent Pump w/ Wide Angle Float Switch, 208V ~ 240V, 25' cord QR Code Product Code: FL32A-2 UPC: 671812102925

Availability: Out Of Stock

Weight:37.00 lb

$306.00
Qty: Add to Cart

Have any questions?
Contact us at 1-800-246-9552

The Liberty Pump FL32A-2 is a 1/3HP, 230 V automatic submersible effluent sump pump with a high voltage capability. The Liberty FL32A has wide angle float switch equipped with a series (piggyback) plug for manual bypass operation. The Liberty FL32A-2 submersible effluent sump pump has a discharge of 1-1/2" NPT. It also has a turn-on level of 12" and shut-off level of 5". This submersible effluent/sump pump has a motor that is enclosed in a cast-iron housing and a 25' power cord. The Liberty Pump FL32A-2 features vortex style impeller made of high temperature engineering polymer, which allows for 3/4" solids handling..

nbsp;

The minimum pit diameter on this sump/effluent pump is 14" in sump conditions and 18" in effluent conditions. This sump/effluent pump can handle liquids up 140F and has a 19' shut off head The Liberty FL32A-2 was specifically designed for STEP Systems, LPP Systems, Mound Systems, Liquid Waste Transfer and Commercial Sump Applications. This pump should not be run dry.


Features:

  • Vortex impeller, made of high temperature engineering polymer, permits passage of solids without clogging;
  • 416 stainless steel rotor shaft;
  • Oil-filled, thermally protected motor;
  • Unitized shaft seal;
  • 1-1/2" FNPT discharge;
  • Quick-disconnect 25' standard power;

Technical Specifications:

  • Horsepower: 1/3 HP;
  • Cord length: 25';
  • Discharge: 1-1/2" FNPT;
  • Solids Handling: up to 3/4";
  • Shut-off Head: 19';
  • Voltage: 208-230V;
  • Amps: 6.6;
  • Hertz: 60 Hz;
  • Phase: 1;
  • Maximum fluid temperature: 140°F;
  • Height: 9.6";
  • Width: 9.8";
  • Weight: 32 lbs.;
  • Minimum pit/basin diameter: 14" in Sump and 18" in Effluent applications;
  • Minimum pit/basin depth: 18" in Sump and 24" in Effluent applications;
Product Specs
Cord Length:25'
Flow at 5 FT Head:53 GPM
Horse Power:1/3
Shutoff Head (ft.):19'
Type:Automatic
Voltage:208v
There are no reviews for this product.

Write a review

Your Name:


Your Review:Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Loading...
Loading...
Loading...