Manual Effluent Pump, 2HP, 25' cord, 440/480V, 3-Phase

Manual Effluent Pump, 2HP, 25' cord, 440/480V, 3-Phase
Manual Effluent Pump, 2HP, 25' cord, 440/480V, 3-Phase QR Code
Views: 3044 Model: FL204M-2
UPC: 671812114829

MPN: FL204M-2

Weight:82.00 lb

Usually ships: 7-10 business days
Qty: Add to Cart


Have any questions?
Contact us at 1-800-246-9552

The FL204M-2 from Liberty Pumps is a Manual Effluent Pump, 2HP, 25' cord, 440/480V, 3-Phase. It's intended to be run using an approved liquid level control or approved motor control with correct rating that matches motor input in full load amperes. Regardless of the control type, be sure that when this effluent sump pump shuts off, at least 3-1/2" of fluid is left in the basin so the impeller remains submerged. The Liberty FL204M submersible sump/effluent pump has a dual sized discharge of 1-1/2" FNPT and 2" FNPT for connection to either size pipe. This effluent sump pump can also handle solids up to 3/4" and has a shut-off head of 130'. These Liberty effluent pumps were designed for STEP systems, mound systems, liquid waste transfer and higher head de-watering applications.

The Liberty FL204M is built of heavy cast iron with an epoxy powder coat finish and stainless steel fasteners. 3-phase models require a control panel for automatic operation. See simplex and duplex panel literature for complete information. Check three phase effluent sump pumps for proper rotation prior to installing pump(s) in basin. To change rotation, reverse any two of the three power leads to the pump. Code the wires for reconnection after installation.


  • 3/4" Solids-handling;
  • Heavy cast iron construction;
  • 2 vane semi-open cast iron impeller;
  • 416 stainless steel rotor shaft;
  • Dual shaft seals. FL200-Series feature upper unitized silicon carbide, lower Viton double lip;
  • Single float, mercury free level control;
  • Additional mounting clamp provided for optional switch mounting to pipe;
  • Fully adjustable pumping range;
  • 2" FNPT threaded discharge with 1-1/2" FNPT flange provided;
  • Quick-disconnect power cord - 25' length standard;

Technical Specifications:

  • Horsepower: 2HP;
  • Cord length: 25';
  • Discharge: 2" FNPT with 1-1/2" FNPT cast iron flange (included);
  • Solids Handling: up to 3/4";
  • Shut-off Head: 130';
  • Voltage: 440-480V;
  • RPM: 3450;
  • Amps: 5.3;
  • Hertz: 60 Hz;
  • Phase: 3;
  • Impeller: 2 vane, semi-open design;
  • Maximum fluid temperature: 140°F;
  • Weight: 82 lbs.;
  • Minimum pit/basin diameter: 14" in Sump and 18" in Effluent applications;
  • Minimum pit/basin depth: 18" in Sump and 24" in Effluent applications;


  • 3 years manufacturer's warranty  
Product Specs
Cord Length: 25'
Flow at 10 FT Head: 102 GPM
Flow at 5 FT Head: 102 GPM
Horse Power: 2
Shutoff Head (ft.): 130'
Type: Manual
Voltage: 480v
There are no reviews for this product.

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: