Manual Sump/Effluent Pump, 50'' cord, 3/4 HP, 208/230V

Manual Sump/Effluent Pump, 50'' cord, 3/4 HP, 208/230V
Manual Sump/Effluent Pump, 50'' cord, 3/4 HP, 208/230V QR Code
Views: 383 Model: 290HV-5

MPN: 290HV-5

Weight:35.00 lb

Dimensions (L x W x H ): 12.00 x 10.00 x 16.00

Usually ships: 5-7 business day(s)
Qty: Add to Cart


Have any questions?
Contact us at 1-800-246-9552

The Liberty 290HV-5 is a 3/4HP, single-phase manual submersible effluent/sump pump that can reach a max flow of 78GPM at 5' of head. The Liberty 290HV-5 is designed with high voltage capability and best used for residential and commercial heavy-duty pumping of large volumes of drainage, effluent and waste water, and other non-corrosive, non-explosive liquids. This Liberty sump/effluent pump has a discharge of 1-1/2NPT and can handle solids up 3/4". The Liberty 290HV-5 manual submersible effluent sump pump has a shut-off of 48' of head and comes with a quick disconnect 50' power cord.

The Liberty 290HV-5 operates at 203/280V and provides a cost-effective mid-range pump for on-site waste water systems, liquid waste transfer, and commercial heavy duty sump pump applications that require higher head or more flow. Liberty's unique Uni-Body casting will provide years of reliable performance.

Technical Specifications:
  • Discharge Size: 1 1/2" FNPT
  • Solids Handling Capability: 3/4" dia.
  • Listing: UL/CSA
  • HP: 3/4
  • Volts: 208/230
  • Phase: 1
  • Hertz: 60
  • Amps: 5.3
  • Flow @ 5'': 78 GPM
  • Flow @ 10'': 72 GPM
  • Flow @ 20'': 58 GPM
  • Thermal overload temp: 248F
  • Shut-off Head: 48''
  • Cord Length: 50''
  • Minimum Sump Diameter: 14"
  • Height: 13"
  • Weight: 31 lbs

  • High Voltage 208/230 V
  • Liberty''s unique, one-piece "Uni-Body" casting
  • Permanently lubricated upper and lower bearings
  • Oil-filled, hermetically sealed motors with thermal overload protection
  • Stainless steel, removable bottom screen
  • 416 Stainless steel rotor shaft
  • All fasteners - corrosion-resistant stainless steel
  • Semi-Open impeller permitting passage of solids up to 3/4"
  • Epoxy powder coat finish
  • 1-1/2" Discharge
  • Stainless steel bottom screen - easily removable
  • Maximum fluid temperature 140F
There are no reviews for this product.

Write a review

Your Name:

Your Review:Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: