Liberty Pumps 290HV-2, 3/4 HP Manual Sump / Effluent Pump, 208V ~ 240V, 25' cord
The Liberty 290HV-2 is a manual submersible effluent/sump pump with a 3/4HP, single-phase motor that can reach a max flow of 78GPM at 5' of head. The Liberty 290HV-2 manual submersible effluent sump pump has a shut-off of 48' of head and comes with a quick disconnect 25' power cord. This Liberty sump/effluent pump has a discharge of 1-1/2NPT and can handle solids up 3/4". The Liberty 290HV-2 is designed with high voltage capability and best used for residential and commercial heavy-duty pumping of large volumes of drainage, effluent and waste water, and other non-corrosive, non-explosive liquids.
The Liberty 290HV-2 operates at 203/280V and provides a cost-effective mid-range pump for on-site waste water systems, liquid waste transfer and commercial heavy duty sump pump applications that require higher head or more flow. Liberty's unique Uni-Body casting will provide years of reliable performance.
Features:
- High Voltage 208/230 V;
- Liberty's unique, one-piece "Uni-Body" casting;
- Permanently lubricated upper and lower bearings;
- Oil-filled, hermetically sealed motors with thermal overload protection;
- Stainless steel, removable bottom screen;
- 416 Stainless steel rotor shaft;
- All fasteners - corrosion-resistant stainless steel;
- Semi-Open impeller permitting passage of solids up to 3/4";
- Epoxy powder coat finish;
- 1-1/2" Discharge;
- Stainless steel bottom screen - easily removable;
- Maximum fluid temperature 140F;
Technical Specifications:
- Discharge Size: 1 1/2" FNPT;
- Solids Handling Capability: 3/4" dia.;
- Listing: UL/CSA;
- HP: 3/4;
- Volts: 208/230;
- Phase: 1;
- Hertz: 60;
- Amps: 5.3;
- Flow @ 5': 78 GPM;
- Flow @ 10': 72 GPM;
- Flow @ 20': 58 GPM;
- Thermal overload temp: 248F;
- Shut-off Head: 48';
- Cord Length: 25';
- Minimum Sump Diameter: 14";
- Height: 13";
- Weight: 31 lbs;
Product Specs | |
Cord Length: | 25' |
Flow at 5 FT Head: | 78 GPM |
Horse Power | 3/4 |
Type1 | Manual |
Voltage | 208v |