Category

Automatic Sump/Effluent Pump w/ Piggyback Wide Angle Float Switch, 35'' cord, 1/3 HP, 115V

Automatic Sump/Effluent Pump w/ Piggyback Wide Angle Float Switch, 35'' cord, 1/3 HP, 115V
Automatic Sump/Effluent Pump w/ Piggyback Wide Angle Float Switch, 35'' cord, 1/3 HP, 115V QR Code
QR-Code
Views: 96 Model: 253-3

MPN: 253-3

Weight:26.00 lb

Dimensions (L x W x H ): 9.00 x 11.00 x 13.50

Usually ships: Upon availability
$290.25
Qty: Add to Cart

ORDERS OVER $99 SHIP FREE

Have any questions?
Contact us at 1-800-246-9552

The Liberty Pump 253-3 is an automatic, submersible effluent/sump pump that comes with a 35-ft. power cord and has a shut-off head of 23'. It has a 1-1/2" discharge and can handle solids up to 1/2". This Liberty effluent/sump pump also has a 1/3HP motor that can produce a flow rate of 36 GPM at 10' and includes a wide-angle float switch. This switch has an "ON" level at 11" and "OFF" level at 4.2" and features a piggy-back plug allowing for manual operation. This effluent sump pump is ideal for pumping of drainage, effluent and waste water and other non-explosive/corrosive liquids.

The Liberty 253-3 effluent sump pump operates at 115V, 5.2 Amp and 60 Hz with a maximum fluid temperature of 140F. This Liberty sump/effluent pump is the perfect choice for low-head effluent pumping or basement de-watering applications, as well as liquid waste transfer for residential or commercial applications that require more flow at low-head. The powerful heavy-duty motor on the Liberty 253-3 effluent sump pump comes with a rugged housing and powder coat finish that is completely submersible and will provide years of reliable performance.



Technical Specifications:
  • Discharge Size: 1 1/2" FNPT
  • Solids Handling Capability: 1/2" dia.
  • Listing: UL/CSA
  • HP: 1/3
  • Volts: 115
  • Phase: 1
  • Hertz: 60
  • Amps: 5.2
  • Flow @ 5'': 45 GPM
  • Flow @ 10'': 38 GPM
  • Flow @ 20'': 14 GPM
  • Thermal overload temp: 248F
  • Shut-off Head: 23''
  • Cord Length: 35''
  • Height: 10.5"
  • Major Width: 9.6"
  • Weight: 24 lbs


Features:
  • Vortex style impeller permitting passage of solids up to 3/4"
  • Cast bronze or cast iron pump housing with protective epoxy coating for corrosion resistance
  • Oil-filled motor housing for lifetime lubrication and rapid heat dissipation
  • 1/3 HP shaded pole motor with thermal overload protection
  • Stainless steel fasteners
  • Mechanical seal (stainless steel spring, nitrile parts, carbon and ceramic faces) for protection against pump failure
  • Upper and lower sintered sleeve bearings for extended motor life
  • Automatic operation with piggyback mechanical float switch with "ON" level at 11" and "OFF" level at 4.2"
There are no reviews for this product.

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Loading...
Loading...
Loading...