64 sqft (2ft x 4ft, 8 panels) Crete-Heat 2" Foam Board Insulation for 3/8", 1/2" & 5/8" PEX, R-10

Crete-Heat expanded polystyrene (EPS) floor insulation boards combine concrete insulation, vapor barrier and PEX tubing holding grid into a single product, which significantly simplifies installation of PEX tubing for radiant heating and snow melting applications in a concrete slab. No foamboard staplers/staples or wire ties needed.
Suitable for insulating slabs in basements, garages, warehouses, etc. - in below, at or above-grade installations (Note: below-grade installations will require a vapor barrier). Compatible with all types (A, B, C) and brands (Everhot, Uponor, Viega, Watts, Zurn, etc.) of PEX tubing. Also compatible with 1/2" PEX-AL-PEX.
Package includes (8) 2ft x 4ft panels, equaling 64 sqft of coverage.

Features:

• Cuts labor by over 60% and allows for a 1-person installation - simply "walk the tubing in the board";
• Tongue & groove interlocking edges make installation easier - no glue or taping needed;
• Knob design allows for spacing in precise 3" increments (3", 6", 9", etc.) - no chalkline needed;
• Lays flat, can be walked on and helps to protect the pipe from damage during construction;
• EPS provides stable R-value and does not need to be adjusted for age;
• CFC and HCFC-Free.

Technical Specifications:

• For PEX tubing sizes: 3/8", 1/2", 5/8";
• PEX Tubing Spacing: 3" (for 3", 6", 9", 12", etc. spacing)
• R-Value: R-10;
• Total Coverage: 64 sqft;
• Total Insulation Thickness (Top to Bottom): 2-7/8";
• Nominal Thickness (Insulation-Only): 2";
• Effective Board Size (Width x Length): 24" x 48";
• Overall Board Size (Width x Length): 25" x 49" (with 1" interlocking edges);
• Compressive Resistance @ 10% Deformation: 25 psi / 3600 psf;
• Perm Resistance: .51 perms;
• Material: High Impact Extruded Polystyrene;