Manual Effluent Pump, 2HP, 25' cord, 208/230V, 3-Phase

The FL203M-2 from Liberty Pumps is a Manual Effluent Pump, 2HP, 25' cord, 208/230V, 3-Phase. It's equipped with a dual sized discharge of 1-1/2" FNPT and 2" FNPT for connection to either size pipe. This effluent sump pump can also handle solids up to 3/4" and has a shut-off head of 130'. These Liberty effluent pumps are designed for STEP systems, mound systems, liquid waste transfer and higher head de-watering applications. The Liberty FL203M is intended to be run using an approved liquid level control or approved motor control with correct rating that matches motor input in full load amperes. Regardless of the control type, be sure that when this effluent sump pump shuts off, at least 3-1/2" of fluid is left in the basin so the impeller remains submerged.

The Liberty FL203M is built of heavy cast iron with an epoxy powder coat finish and stainless steel fasteners. 3-phase models require a control panel for automatic operation. See simplex and duplex panel literature for complete information. Check three phase effluent sump pumps for proper rotation prior to installing pump(s) in basin. To change rotation, reverse any two of the three power leads to the pump. Code the wires for reconnection after installation.

Features:

• 3/4" Solids-handling;
• Heavy cast iron construction;
• 2 vane semi-open cast iron impeller;
• 416 stainless steel rotor shaft;
• Dual shaft seals. FL200-Series feature upper unitized silicon carbide, lower Viton double lip;
• Single float, mercury free level control;
• Additional mounting clamp provided for optional switch mounting to pipe;
• Fully adjustable pumping range;
• 2" FNPT threaded discharge with 1-1/2" FNPT flange provided;
• Quick-disconnect power cord - 25' length standard;

Technical Specifications:

• Horsepower: 2HP;
• Cord length: 25';
• Discharge: 2" FNPT with 1-1/2" FNPT cast iron flange (included);
• Solids Handling: up to 3/4";
• Shut-off Head: 130';
• Voltage: 208-230V;
• RPM: 3450;
• Amps: 10.6;
• Hertz: 60 Hz;
• Phase: 3;
• Impeller: 2 vane, semi-open design;
• Maximum fluid temperature: 140°F;
• Weight: 82 lbs.;
• Minimum pit/basin diameter: 14" in Sump and 18" in Effluent applications;
• Minimum pit/basin depth: 18" in Sump and 24" in Effluent applications;

Warranty:

• 3 years manufacturer's warranty