1/2” Push x 3/8” OD Compression Angle Stop Valve (1/4-Turn), Lead-Free

The G2PS19X-C from BrassCraft is a 1/2” Push Connect x 3/8” OD Compression Angle Stop Valve (1/4-Turn), Lead-Free).

Materials of Construction:

• Valve Body: Compliant brass;
• Stem Barrel: Santoprene;
• Stem Shaft: Glass-filled polypropylene;
• Stem O-ring: EPDM;
• Gripper Ring: Stainless steel;
• PushConnect O-Ring:Viton & Nitrile rubber;
• Tube Stiffener: Stainless steel;
• Locking Clip: Nylon;
• Removal Flange: Glass-filled nylon:
• Handle: Zinc die cast;
• Screw: Zinc-plated steel;
• Compression Nut & Sleeve: C36000 brass.

Features:

• Compatible with PEX, copper and CPVC
• Dual O-rings. Viton and Nitrile o-rings both provide chemical resistance
• the Viton o-ring adds heat resistance & the Nitrile o-ring abrasion resistance
• Pre-inserted tube stiffener is “installation ready” for a faster connection
• Locking clip adds security to connection while allowing removal if needed
• Captive removal flange permits easy removal from tube
• One-Piece shut-off mechanism provides smooth on-off operation without freeze ups even after long periods of non-use
• Positive 1/4 turn shut-off
• Easy-to-remove handle protects against accidental operation during rough-ins
• 100% leak tested
• Compliant stops available for California and Vermont “low-lead” requirements.
   

Technical Specifications:

• Closing: 1/4 Turn
• Inlet: 5/8” OD (1/2” Nominal) PushConnect
• Outlet: 3/8” OD (1/4"" Nominal) Compression
• Valve Type: Angle
• Temperature: 40°F to 140°F
• Maximum Pressure: 125 PSI.