MF300 PressurePal Hydronic System Mini Feeder, 17 gallon

MF300 PressurePal Hydronic System Mini Feeder, 17 gallon

MF300 PressurePal Hydronic System Mini Feeder, 17 gallon QR Code
QR-Code
Brand: Axiom

Product Code: MF300

Availability: In Stock

Weight:0.10 lb



Usually ships: 1 business days
$635.95
Qty: Add to Cart

Have any questions?
Contact us at 1-800-246-9552

MF300 PressurePal feeder (17.0 gal) is ideal for feeding and pressurizing closed-loop heating systems with operating pressure of 25 psi and below. It allows for installation of stand-alone hydronic heating, radiant heating, snow/ice melting systems and forced air coil heat exchangers - without the need for running a separate potable water supply line. Axiom hydronic feeders are compatible with water and up to 50% water/glycol mix solutions and plug directly into a US standard electrical wall outlet - no special wiring or control boxes needed. MF300 is easy to install & service, saves time & labor and helps to prevent major flooding caused by leaks and ruptured pipes.


Features:

  • Compatible with water & glycol (anti-freeze) mixes;
  • Perfect for stand-alone hydronic and radiant heating, snow melting and heating/cooling coils;
  • Plugs directly into a standard 115VAC outlet;
  • No need for piping to a potable water supply - no need for backflow preventer;
  • Built-in diaphragm pump can run dry without damage;
  • Make-up fluid stored in the feeder tank can be pre-treated;
  • Diverter valve allows for easy purging of air on start-up and manual agitation of solution;
  • Major flood prevention - in the event of leakage or system rupture, only the tank contents will be pumped into the system;
  • Early leak detection - dropping fluid level indicate that the system has developed a leak;
  • Fluid drained for service can easily be re-used (put back into the system);
  • Fluid level switch shuts the pump off if fluid level in the tank gets too low;
  • Auxiliary dry contacts for (optional) low-level alarm installation.

Technical Specifications:

  • Pressure switch range: 10-25 psig (70-170 kPa) - adjustable, factory set to 15 psig;
  • Tank volume: 17 gallons (65.0 liters);
  • System connection: 1/2" FPT;
  • Electrical: 115V, 60Hz, US standard 3-prong plug;
  • Weight (when empty): 15.0 lbs (6.8 kg);
  • Dimensions (L x W x H): 11.75" (300mm) x 11.75" (300mm) x 36" (900mm);
  • Pump performance: up to 0.7 GPM @ free flow, self-priming up to 4ft (1.2m);
  • Max. glycol concentration: 50%.
Product Specs
Electrical:115V, 60Hz, US standard 3-prong plug
Max. glycol concentration:50%.
System connection:1/2" FPT
Tank Volume:17 gallons (65.0 liters)
Weight (when empty):15.0 lbs (6.8 kg)
There are no reviews for this product.

Write a review

Your Name:


Your Review:Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Loading...
Loading...
Loading...