Category

165ft Electric Radiant Floor Heating Cable, 120V

165ft Electric Radiant Floor Heating Cable, 120V
165ft Electric Radiant Floor Heating Cable, 120V QR Code
QR
Views: 7978 Model: 6FHC-165

MPN: 6FHC-165

Weight:7.00 lb

Usually ships: Upon availability
$199.95
Qty: Add to Cart

ORDERS OVER $99 SHIP FREE

Have any questions?
Contact us at 1-800-246-9552

The 6FHC-165 from Senphus is an Electric Radiant Heat Cable, 164'. It's an easy-to-install, economical way to warm an indoor floor. These cables can be placed in bathrooms, kitchens, as well as living areas. These cables are not designed for exterior or snow-melting applications, or for ceiling installation. To install, simply fasten the cables to the floor, add a layer of mortar, and lay the floor covering.

Senphus 6FHC-165 Floor Heating Cables are designed to run at 120V, and are 164 ft long. These Cables radiate heat approximately 2” on either side of the cable, which makes consistent coverage significant. However, the attainable floor temperature ultimately depends on the floor’s insulation, and in the case of uninsulated slab applications, on the thermal drain of the underlying materials.  

Senphus Electric Radiant Floor Heating Cables can also be used to heat a room, if the room’s heat loss falls within the mat’s heating parameters. However, they are not intended for this purpose.

CAUTION: Do not install Electric Radiant Floor Heating Cables in confined areas where excessive heat can accumulate, such as underneath cabinets, fixtures within a wall, or small closets.


Features:

  • Conductor:Alloy or Tinned copper
  • Insulation: XLPE
  • Drain wire:Tinned copper
  • Screen:AL-Mylar


Technical Specifications:

  • Power: 900W;
  • Resistance @68F+10/-5%(Ω): 16;
  • Cable length: 164 ft.;
  • Conductor material: Alloy;
  • Insulation Material: FEP+XLPE;
  • Insulation OD (in.): 0.10;
  • Jacket material: PVC;
  • Jacket OD (in.): 0.21x0.32;
  • Power supply: 120Vac, 60HZ;
  • Rating power: 6W/ft;
  • Certification:: CE,UL;
  • Min installation temp: +41F;
  • Min bending radius: 40mm;
Product Specs
Length (Feet): 165
Type: Electric Heat Cables
Voltage: 110V ~ 120V
Wattage: 908W
There are no reviews for this product.

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Loading...
Loading...
Loading...