Magnetic Drive Pump for Highly Corrosive, 1/12HP, 115V

Click Image for Gallery

The 581603 from Little Giant is a Magnetic Drive Pump for Highly Corrosive, 1/12HP, 115V. Designed for in-line, non-submersed use.

Little Giant MD-HC Magnetic Drive Pumps feature 6ft power cord with 3-Prong Plug, leakproof, seal-less magnetic drives, 99.5% pure alumina ceramic shaft and thrust washers for excellent wear and trouble-free service. Spindle shaft is supported at both ends to prevent impeller damage during start-up and stop of pump. For excellent chemical resistance, volute, magnet housing and impeller of this Little Giant Magnetic Drive Pump are glass-filled Ryton polypropylene.

The Little Giant 3-MD-HC has 3/4" FNPT Intake and 1/2" MNPT Discharge.

Features:

Specific Gravity up to 1.1;
Thermally protected, open, fan-cooled motor;
6' power cord with 3-prong plug;
Sleeve bearings;
Ambient Air Temperature up to 77F;
Fluid Temperature up to 200F.

Technical Specifications:

Horsepower: 1/12HP;
Flow: 750 @ 1' of Head;
Cord Length: 6';
Shut Off Head: 21.9';
Voltage: 115V;
Intake: 1/2" FNPT;
Discharge: 1/2" MNPT;
Hertz: 50/60Hz;
Watts: 180W;
Weight: 8.75 lbs;
Height: 5";
Width: 4";
Length: 8.9";
Certification: UR/C-CSA.

Product Specs
Amperage:	2.4
Application	Strong Acids
Capacity (Gallons):	12.5
Cord Length:	6 Feet
Dimensions:	5"H x 4"W x 8.9"L
Flow at 1 FT Head:	750 GPH
Hertz:	50/60
Horse Power	1/12
RPM:	3100
Shutoff Head (ft.):	21.9'
Voltage	115v
Wattage	180
Weight (lbs):	8.75 lbs

Views: 8805
Model: 581603
MPN: 581603
Availability: Discontinued
Usually ships: 1