1-1/4" - 2" Inflatable Pipe Test Plug

1-1/4" - 2" Inflatable Pipe Test Plug
1-1/4" - 2" Inflatable Pipe Test Plug QR Code
Views: 5112 Model: 882-ES12

MPN: 882-ES12


Weight:7.30 lb

Dimensions (L x W x H ): 6.25 x 6.25 x 4.25



Have any questions?
Contact us at 1-800-246-9552

The 882-ES12 from Sioux Chief is a 1-1/4” - 2” Inflatable Pipe Test Plug. It comes with a pre-installed schrader valve and chain to accommodate removal. Suitable for use inside 1-1/4" through 2" PVC (Sch. 40), ABS or Cast Iron (CI) DWV pipe.

Warning: as with all pressure testing equipment, follow all applicable codes/procedures, manufacturer reccommendations and wear safety gear when performing DWV drain tests. Stay clear of the test tees, cleanouts and pipe ends while system is under pressure.


  • Reusable - easy installation and removal;
  • Concave bottom increases contact area and reduces the likelihood of plug blowout;
  • Bell shaped ribs provide superior seal, even if plug installed at an angle;
  • Durable chain with zinc-plated ring allows easy removal after deflation;
  • Made in the USA.

Technical Specifications: 

  • For PVC, ABS or Cast Iron DWV pipe with nominal diameter of 1-1/2" - 2";
  • Length: 5-1/2";
  • Min pipe diameter: 1.17";
  • Max pipe diameter: 2.25";
  • Inflation pressure: 45 PSIG;
  • Max back air pressure: 5 PSIG;
  • Max back head water pressure: 30 ft.
Product Specs
Inflation pressure:45 PSIG
Max back air pressure:5 PSIG
Max back head water pressure:30 ft.
Max pipe diameter:2.25"
Min pipe diameter:1.17"
There are no reviews for this product.

Write a review

Your Name:

Your Review:Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: