Magnetic Drive Pump for Semi-Corrosive, 1/12HP, 115V

Click Image for Gallery

The 581503 from Little Giant is a Magnetic Drive Pump for Semi Corrosive, 1/12HP, 115V. Designed for in-line, non-submersed use.

Little Giant MD-SC Magnetic Drive Pumps feature 6ft power cord with 3-prong plug, leakproof, seal-less magnetic drives, 99.5% pure alumina ceramic shaft and thrust washers. Spindle shaft is supported at both ends to prevent impeller damage during start-up and stop of pump. For excellent chemical resistance, volute, magnet housing and impeller of the Little Giant Magnetic Drive Pump are glass-filled polypropylene.

The Little Giant 3-MD-SC has 3/4" FNPT Intake and 1/2" MNPT Discharge.

Features:

Specific Gravity up to 1.1';
Thermally protected, open, fan-cooled motor;
6' power cord with 3-prong plug;
Sleeve bearings;
Ambient Air Temperature up to 77F;
Fluid Temperature up to 150F.

Technical Specifications:

Horsepower: 1/12HP;
Flow: 750 @ 1' of Head;
Cord Length: 6';
Shut Off Heat: 21.9';
Voltage 115V;
Intake: 3/4" FNPT;
Discharge: 1/2" MNPT;
Hertz: 50/60Hz;
Watts: 190W;
Weight: 8.5 lbs;
Height: 5";
Width: 4";
Length: 9.8";
Certification: UR/C-CSA.

Product Specs
Amperage:	2.4
Application	Mild to Strong Acids
Capacity (Gallons):	12.5
Cord Length:	6 Feet
Dimensions:	5"H x 4"W x 9.8"L
Flow at 1 FT Head:	750 GPH
Hertz:	50/60
Horse Power:	1/12
RPM:	3100
Shutoff Head (ft.):	21.9'
Voltage	115v
Wattage:	190
Weight (lbs):	8.5 lbs