Two Handle High-Arc Bar Faucet, Stainless Steel (Angelic Series)

Two Handle High-Arc Bar Faucet, Stainless Steel (Angelic Series)
Two Handle High-Arc Bar Faucet, Stainless Steel (Angelic Series) QR Code
Views: 293 Product Code: OPA-320SS

Weight:2.60 lb

Dimensions (L x W x H ): 10.00 x 14.50 x 3.00

Usually ships: Upon availability
Qty: Add to Cart

Have any questions?
Contact us at 1-800-246-9552

This 2 handle, goose neck stainless steel faucet is from the OmniPro Angelic series. With the builder in mind, this bar faucet is designed for easy installation and high quality performance. 


It is a two metal faucet lever that is a 4" centerset that meets water flow guidelines without sacrificing performance.  This bar faucet uses ceramic disc cartridges. The benefit of a ceramic disc faucet means that there are two ceramic discs, an upper one that moves and a lower one that is fixed. The two discs move against each and becomes either watertight or will allow it to pass. Ceramic cartridges are durable and prevent water leakage.


It is equipped with a modern, fixed, non-swivel style, high goose spout  with a reach of 3 9/16" and a height of 10 7/8".  It allows for unobstructed sink access. This is both visually appealing and practical to tactical all common bar tasks.


This design does not compromise it's quality. First, it is ideal for an active bar with it's cleaning power. The water flow of this goose neck bar faucet  is 5.7L/min at 60psi.


It is also an aerated stream for cleaning.


This bar faucet is finished in stainless steel which means it resists tarnishing and corrosion .


The Omni Two Handle High-Arc Bar Faucet also offers easy installation and comes with all necessary mounting hardware.




·         Two Handle Bar Faucet

·         Finish: Stainless Steel

·         Spout Type High-Arc

·         Spout Height: 10 7/8"

·         Spout Reach: 3 9/16"

·         Number of installation holes required: 2

·         Faucet Centers: 4"

·         Flow Rate: 1.5 L / min

·         2 handles included

·         Low lead compliant This Product Contains Less Than 0.25% Weighted Average Lead Content On Wetted Surfaces

·         Applicable Standard ADA, ASME A112.18.1/CSA B125.1, NSF 61/9, IAPMO, AB1953/S152

·         All necessary mounting hardware included


About OmniPro

OmniPro carries the designs and finish that will meet the needs of both professional or do it yourself project for kitchen and bathroom fixtures, shower heads, tubs, bath faucets and modern bathroom vanities.  All products are SWDA compliant and the majority of our tub and showers and lavatory faucets are EPA WaterSense certified.


Omni meets the needs for a new construction or new bathroom remodeling ideas with its different line series. Some of which contain job kits for easy installation with bathtub faucet parts, faucets, tubs, handheld showers and bathing equipment.


Angelic Series: This series is an ideal choice for remodeling, repairing, replacing or for new project that demands high quality performance and design at reasonable and moderate price points. The Angelic Series comes in Chrome, Stainless Steel, Brushed Nickel and Oil Rubbed Bronze finishes.  



For complete product instructions specifications and how-to installation please visit:

There are no reviews for this product.

Write a review

Your Name:

Your Review:Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: