Two Handle Low-Arc Kitchen Faucet w/ Side Spray, Polished Chrome (Builder Series)

Two Handle Low-Arc Kitchen Faucet w/ Side Spray, Polished Chrome (Builder Series)
Two Handle Low-Arc Kitchen Faucet w/ Side Spray, Polished Chrome (Builder Series) QR Code
QR-Code
Views: 148 Product Code: OPB-240C


Weight:2.90 lb

Dimensions (L x W x H ): 10.00 x 17.50 x 3.00

Usually ships: Upon availability
$0.00
Qty: Add to Cart

Have any questions?
Contact us at 1-800-246-9552

This 2 handle kitchen faucet is from the OmniPro Builder series. With the builder in mind, this kitchen faucet is designed for easy installation and high quality performance. 

It is a two metal faucet lever that is an 8" centerset that meets water flow guidelines without sacrificing performance.  This kitchen faucet uses ceramic disc cartridges. The benefit of a ceramic disc faucet means that there are two ceramic discs, an upper one that moves and a lower one that is fixed. The two discs move against each and becomes either watertight or will allow it to pass. Ceramic cartridges are durable and prevent water leakage.

It is equipped with an elegant D-style swivel, low arc spout  with an extended reach of 9 1/16" and a height of 6 3/4". Ideal for practical and daily kitchen use.

The side spray is reach is 2 13/16" and the height is 5 1/8".  The spray is at a 15 degree angle.

While it provides a very modern design, the maximum flow rate is still 5.7 L / min at 60psi.

This faucet is beautifully finished in polished chrome. It  remains bright and with stand the test of time.

With this two handle kitchen faucet with side spray, it is a guaranteed quality and a modern look that will update your kitchen.

Features:

·         Kitchen Faucet

·         Type 2-Handle

·         Inlet Size 1/2 Inch-14 NPSM

·         Spout Type D Style

·         Side Spray  reach is 2 13/16 ,  height is 5 1/8"  The spray is at a 15 degree angle

·         Side Spray Width is 2" with 1/2"-14NPSM

·         Spout Dimensions 10-11/16 Inch Length x 6-3/4 Inch Height x 5-9/16 Inch  x 9-1/16 Inch Reach

·         Contains Less Than 0.25% Weighted Average Lead Content On Wetted Surfaces

·         Handle Type Lever

·         Handle Material Metal

·         Color/Finish Chrome

·         Faucet Hole Center 8 Inch

·         Flow Rate 5.7 LPM at 60 PSI

·         4-Hole Installation

·         Ceramic Cartridge

·         Applicable Standard ADA, IAPMO/CUPC, NSF/ANSI 61-9/372, ANSI/ASME A112.18.1M/A112.18.1, CA AB1953

About OmniPro

OmniPro carries the designs and finish that will meet the needs of both professional or do it yourself project for kitchen and bathroom fixtures, shower heads, tubs, bath faucets and modern bathroom vanities.  All products are SWDA compliant and the majority of our tub and showers and lavatory faucets are EPA WaterSense certified.

Omni meets the needs for a new construction or new bathroom remodeling ideas with its different line series. Some of which contain job kits for easy installation with bathtub faucet parts, faucets, tubs, handheld showers and bathing equipment.

Builder Series: Although it showcases pleasing and timeless designs, the Builder Series is particularly designed to make a job of a builder easy with its job packs. It also features EPA WaterSense approved lavatory and tub and shower configurations.

Documentation:

For complete product instructions specifications and how-to installation please visit: http://www.omniprofaucets.com/product.cfm?product_id=883

There are no reviews for this product.

Write a review

Your Name:


Your Review:Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Loading...
Loading...
Loading...