Little Giant 586600 1/2 Hp Highly Corrosive Handling Manual Magnetic Drive Pump, 110v ~ 120v|208v ~ 240v

Little Giant 586600 1/2 Hp Highly Corrosive Handling Manual Magnetic Drive Pump, 110v ~ 120v|208v ~ 240v

Little Giant 586600 1/2 Hp Highly Corrosive Handling Manual Magnetic Drive Pump, 110v ~ 120v|208v ~ 240v QR Code
Product Code: 586600 UPC: 010121866003

Availability: Out Of Stock

Weight:30.00 lb

Usually ships: Upon availability
Qty: Add to Cart

Have any questions?
Contact us at 1-800-246-9552

Little Giant TE-6-MD-CK (586600) is a Magnetic Drive Pump with Teflon (Chemloy) Impeller Bushing 1/2 HP, Dual Voltage 115/230V. CK Series handles highly corrosive chemicals and solutions, acids, alkalis, solvents, plating solutions, sterile solutions and other special fluids at elevated temperatures because of the unique materials used in it's construction. Designed for in-line, non-submersed use in environments such as hospitals, chemical companies, photo labs, dry cleaning plants, car washes, machine shops, laboratories, manufacturing plants, print shops and wineries.

TE-6-MD-CK Magnetic Drive Pump features a 3/4" MNPT discharge with head capacity of 49'. The TE-6-MD-CK with a 1" FNPT Intake was specifically engineered to handle highly corrosive fluids with high efficiency and long term dependability. Little Giant TE-6-MD-CK has Carbon-filled polyvinylidene fluoride (Kynar) Back Plate, Volute, Impeller Assembly and a chemical resistant plastic separator housing to ensure ultimate chemical resistance. Only chemical resistant materials are in contact with fluids. Carbon-filled Kynar Impeller utilizes Chemloy Bushing between itself and the spindle for the ultimate performance and functionality. Little Giant TE-6-MD-CK boasts leakproof, seal-less magnetic drive, Fluid Temperature operation up to 200F and Ambient Air Temperature up to 77F. Ceramic shaft seal, thrust washers and Viton parts are 99.5% pure alumina provide a longer service life, excellent wear and trouble-free service. Little Giant's powerful 1/2 HP Split Phase (TEFC) thermally protected, totally enclosed, fan-cooled motor with ball bearings and thermal overload protection delivers 33.7 GPM of fluids at 10' total dynamic head. Pumping heads are easily rotated, cleaned or serviced with no special tools required. Conduit box must be wired in field. Cord not included.


  • Specific Gravity - up to 1.1;
  • Ambient Air Temperature - up to 77F;
  • Fluid Temperature - up to 200F;
  • Power Cord not included;
  • Thermally protected, totally enclosed, permanent split capacitor motor;
  • Ball bearings;
  • Listings: UR/C-CSA;

Technical Specifications:

  • Motor: 1/2 HP TEFC, Split Phase;
  • RPM: 2850/3450;
  • Maximum flow rate: 35GPM (33.7 GPM @ 10');
  • Maximum Head: 49';
  • Intermittent Liquid Temp: 200F;
  • Specific gravity: 1.1;
  • Intake: 1" FNPT;
  • Discharge: 3/4" MNPT;
  • Voltage: 115/230 V;
  • Hertz: 50/60 Hz;
  • Watts: 835 W;
  • Weight: 30 lbs;
  • Height: 7";
  • Width: 8.75";
  • Length: 14.4";
Product Specs
Application:Highly Corrosive Acids
Capacity (Gallons):35
Dimensions:7"H x 8.75"W x 14.40"L
Flow at 5 FT Head:2100 GPH
Horse Power:1/2
Shutoff Head (ft.):49.1'
Weight (lbs):30 lbs
There are no reviews for this product.

Write a review

Your Name:

Your Review:Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: