Magnetic Drive Pump for Highly Corrosive, 1/10HP, 115V

Magnetic Drive Pump for Highly Corrosive, 1/10HP, 115V
Magnetic Drive Pump for Highly Corrosive, 1/10HP, 115V QR Code
Views: 2672 Product Code: 582603
UPC: 010121826038

MPN: 582603

Weight:9.00 lb

Dimensions (L x W x H ): 12.00 x 7.00 x 8.00

Usually ships: Upon availability
Qty: Add to Cart


Have any questions?
Contact us at 1-800-246-9552

The 582603 from Little Giant is a Magnetic Drive Pump for Highly Corrosive, 1/10HP, 115V. It's for highly corrosive chemicals and solutions, acids, alkalis, solvents, plating solutions, sterile solutions and other special fluids. Designed for in-line, non-submersed use in environments such as hospitals, chemical companies, photo labs, dry cleaning plants, car washes, machine shops, laboratories, manufacturing plants, print shops and wineries.

4-MD-HC Magnetic Drive Pump features a 1/2" MNPT discharge with head capacity of 24.3'. Little Giant 4-MD-HC with a 1" FNPT Intake was specifically engineered to handle highly corrosive fluids with high efficiency and long term dependability. The newest 4-MD-HC has Glass-filled Ryton (polyphenylene sulfide) volute, magnet housing and impeller to ensure ultimate chemical resistance. Only chemical resistant materials are in contact with fluids. Glass-filled Ryton Impeller with carbon bushing allows a Run-dry capability of up to eight hours without damage. Little Giant 4-MD-HC boasts leakproof, seal-less magnetic drive, Fluid Temperature operation up to 200F and Ambient Air Temperature up to 77F. Ceramic shaft seal, thrust washers and Viton parts are 99.5% pure alumina provide a longer service life, excellent wear and trouble-free service. Little Giant's powerful 1/10 HP Open FC, PSC, thermally protected, totally enclosed, fan-cooled motor with ball bearings and thermal overload protection delivers 11.8 GPM of fluids at 9' total dynamic head. Pumping heads of 4-MD-HC are easily rotated, cleaned or serviced with no special tools required.


  • Specific Gravity - up to 1.1';
  • Ambient Air Temperature - up to 77F;
  • Fluid Temperature - Up to 200F;
  • Sleeve Bearings;
  • 6' power cord and 3-prong molded plug;
  • Listings: UR/C-CSA;

Technical Specifications:

  • Horsepower: 1/10 HP (3000 RPM);
  • Maximum flow rate: 14 GPM (850 GPH @ 1');
  • Maximum Head: 24.3
Product Specs
Amperage: 1.7
Application: Strong Acids
Capacity (Gallons): 14
Cord Length: 6 Feet
Dimensions: 4.9"H x 5.5"W x 9.6"L
Flow at 1 FT Head: 850 GPH
Hertz: 50/60
Horse Power: 1/10
RPM: 3000
Shutoff Head (ft.): 24.3'
Voltage: 115v
Wattage: 185
Weight (lbs): 9.25 lbs
There are no reviews for this product.

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: