Little Giant 558282 Convertible Jet Pressure Switch Pump, 110v ~ 120v|208v ~ 240v

Little Giant 558282 Convertible Jet Pressure Switch Pump, 110v ~ 120v|208v ~ 240v

Little Giant 558282 Convertible Jet Pressure Switch Pump, 110v ~ 120v|208v ~ 240v QR Code
Product Code: 558282

Availability: Out Of Stock

Weight:37.00 lb

Usually ships: Upon availability
Qty: Add to Cart

Have any questions?
Contact us at 1-800-246-9552

Little Giant JPC-075-C (558282) is a Convertible Jet Pump with Square D pressure switch, voltage selector Switch, 3/4 HP, Dual Voltage 115/230 Volt, 60 Hz - JPC Series, is recommended for supplying fresh water to rural homes, farms and cabins from from either shallow (25' or less) or deep (to 90' deep) applications and is suitable for installs where the vertical distance from the pump to the pumping water level does not exceed 90'.

Little Giant JPC-075-C features a 1" NPT discharge with head capacity of 164' and brass flow control valve. The New Convertible Jet Pump with a 1 1/4" Suction NPT was specifically engineered to handle water transfer with high efficiency and long term dependability. Little Giant JPC-075-C boasts rugged cast iron construction and precision engineered thermoplastic impeller, diffuser, nozzle and venturi for high performance and efficient water flow. Powerful O. Smith 3/4 HP, dual compartment motor, delivers 18.2 GPM of fluids at 5' (shallow), 3.5 GPM at 90' (deep) and has a higher than NEMA service factor. JPC-075-C Convertible Jet Pump features a pressure gage, factory pre-set 30/50 pressure switch which produces up to 50 PSI with automatic shut-off and a stainless steel motor shaft with dual ball bearings. Heavy-duty cast iron casing and seal plate ensure years of service and reliability.



  • Cast iron casing and seal plate for durability and long life;
  • A.O. Smith higher than standard NEMA service factor dual compartment motor;
  • Dual voltage 115/230V;
  • Square D pressure switch preset at 30-50 PSI;
  • 1 1/4" suction, 1" NPT discharge and brass flow control valve;
  • Stainless steel motor shaft seal and dual ball bearings;
  • Precision engineered thermoplastic impeller, diffuser, nozzle and venturi;
  • Includes deep well venturi and a pressure gage;

Technical Specifications:

  • Horsepower: 3/4 HP;
  • Flow: 18.2 GPM @ 5' (shallow), 3.5 GPM @ 90' (deep);
  • Shut Off @ 164' of Head;
  • Voltage: 115/230 V;
  • Hertz: 60 Hz;
  • Amps: 14.8/7.4 A;
  • Weight: 37 lbs;


1 year manufacturers warranty from the date of purchase.
Product Specs
Discharge:1" NPT
Flow Rate (GPM):18 GPM
Horse Power:3/4
Shutoff Head (ft.):164'
There are no reviews for this product.

Write a review

Your Name:

Your Review:Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: