Little Giant 520225 2" Fnpt Discharge High-head Manual Heavy Duty Effluent Pump, 20" Cord, 208v ~ 240v

Little Giant 520225 2" Fnpt Discharge High-head Manual Heavy Duty Effluent Pump, 20" Cord, 208v ~ 240v

Little Giant 520225 2" Fnpt Discharge High-head Manual Heavy Duty Effluent Pump, 20" Cord, 208v ~ 240v QR Code
QR-Code
Product Code: 520225 UPC: 010121202252

Availability: Out Of Stock

Weight:92.00 lb



Usually ships: Upon availability
$909.95
Qty: Add to Cart

Have any questions?
Contact us at 1-800-246-9552

Little Giant 20E-CIM (520225) is a Manual Submersible Heavy-Duty Effluent Pump - Magnum 20E Series, with 20' power cord, 2 Horsepower, 200-208 Volts (3 Phase), 60 Hz, recommended for use in sumps, basins or lift stations and is suitable for dewatering, water transfer, effluent and wastewater removal with a wide use in residential, commercial, industrial and agricultural applications.

The 20E Series dewatering and Effluent pump features a vertical 2" FNPT discharge with head capacity of 110' and ABS base. 20E-CIM Eliminator Submersible Effluent Pump was specifically engineered to handle liquids and up to 3/4" diameter soft solid waste materials and deals with tough effluent and demanding tasks in wastewater and effluent waste transfer with high efficiency and long term dependability. Little Giant 20E-CIM has an epoxy coated heavy-duty cast iron housing, cover and volute, to ensure rust resistance, with all exposed component parts made of corrosion resistant materials to provide a longer service life.

Little Giant 20E-CIM boasts brass non-clog Impeller with pressure relief vanes, maximum 140F operating temperature, mechanical seals (stainless steel spring, nitrile parts, carbon and ceramic shaft seal) and 300 Series stainless steel hardware. Oil filled motor housing of 20E-CIM provides lifetime lubrication and rapid heat dissipation. Little Giant's powerful 2 HP, 3 phase induction, high speed 3100 RPM motor with automatic reset thermal overload protection delivers 135 GPM of wastewater at 20' total dynamic head. This newest 20E-CIM Magnum Submersible Effluent Pump is an ideal solution for effluent and wastewater removal and handling where such materials must be moved upward from a collection area to sewer or septic lines or drainage areas.


Features:

  • Completely submersible, designed for continuous duty
  • Handles liquids and solid waste materials up to 3/4" diameter;
  • Epoxy coated cast iron housing, cover and volute for corrosion resistance;
  • Oil-filled motor housing for lifetime lubrication and rapid heat dissipation;
  • Stainless steel screws, bolts and seal assembly;
  • Mechanical seal (stainless steel spring, nitrile parts, carbon and ceramic faces) for long life and reliability;
  • 2" FNPT vertical Discharge;
  • 2 HP PSC ball bearing motor with overload protection;
  • Thermal overload protection on single phase units;
  • Upper and lower ball bearings;
  • Capacitor start on single phase units;
  • Capacitor & power cord isolated from oil-filled motor housing for ease of field maintenance;
  • Brass impeller;
  • Exclusion Seal;
  • UL / CSA listed;

Technical Specifications:

  • Horsepower: 2 HP;
  • Flow: 135 GPM @ 20';
  • Cord Length: 20';
  • Shut Off: 110';
  • Liquid Temperature: 140F;
  • Discharge: 2" FNPT;
  • Impeller: Brass;
  • Solids Handling: 3/4";
  • Voltage: 200-208 V, 3Ph;
  • Hertz: 60 Hz;
  • Amps: 13.1 A;
  • Watts: 2478 W;
  • Weight: 92 lbs.;
  • Height: 17.75";
  • Width: 8.42";
  • Length: 12.93";

Warranty:

2 years manufacturers warranty from the date of purchase.
Product Specs
Cord Length:20 ft
Horse Power:2
Phase:3
Shutoff Head (ft.):110
Solids Size:3/4"
Type:Manual
Voltage:208v
There are no reviews for this product.

Write a review

Your Name:


Your Review:Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Loading...
Loading...
Loading...