Manual Sewage Pump, 1HP, 20' cord, 380/460V, 3-Phase

Manual Sewage Pump, 1HP, 20' cord, 380/460V, 3-Phase
Manual Sewage Pump, 1HP, 20' cord, 380/460V, 3-Phase QR Code
Views: 1701 Product Code: 514730
UPC: 010121147300

MPN: 514730

Weight:90.00 lb

Usually ships: 5-7 business days
Qty: Add to Cart


Have any questions?
Contact us at 1-800-246-9552

The 514730 from Little Giant is a Manual Sewage Pump, 1HP, 20' cord, 380/460V, 3-Phase. It's recommended for use in sumps, basins or lift stations and is suitable for pumping sewage, effluent, wastewater and other non-explosive, non-corrosive liquids. It has a wide use in residential, commercial, industrial and agricultural applications with light to medium transfer demands.

16S-CIM Dominator submersible Sewage Ejector Pump features a vertical 3" FNPT discharge with head capacity of 35' and ABS base. The 16S Series Pump was specifically engineered to handle liquids and up to 2" diameter soft solid waste materials and deals with tough effluent and demanding tasks in wastewater and effluent waste transfer with high efficiency and long term dependability. Little Giant 16S-CIM has an epoxy coated heavy-duty cast iron housing and volute, to ensure rust resistance, with all exposed component parts made of corrosion resistant materials to provide a longer service life. Little Giant 16S-CIM boasts dynamically balanced two-vane non-clogging epoxy coated cast iron impeller with pump-out vanes for enhance pumping performance and efficiency, maximum 140F operating temperature, secondary exclusion seal, mechanical seals (stainless steel spring, nitrile parts, carbon and ceramic shaft seal) and 300 Series stainless steel hardware. Oil filled motor housing of 16S-CIM provides lifetime lubrication and rapid heat dissipation. Little Giant's powerful 1 HP, 1625 RPM motor with automatic reset thermal overload protection delivers 160 GPM of wastewater at 10' total dynamic head. This newest 16S-CIM Submersible Sewage Ejector Pump is an ideal solution for effluent and wastewater removal and handling where such materials must be moved upward from a collection area to sewer or septic lines or drainage areas.


  • Handles liquids and solid waste materials up to 2" diameter
  • Cast iron housing with protective epoxy coating for corrosion resistance
  • 3" FNPT discharge
  • Oil-filled motor housing for lifetime lubrication and rapid heat dissipation
  • Stainless steel screws, bolts and lifting ring
  • Mechanical seals (stainless steel spring, nitrile parts, carbon and ceramic faces) for long life and reliability
  • Secondary exclusion seal to help protect mechanical seal
  • 1 HP ball bearing motor
  • Thermal overload protection
  • Capacitor & power cord isolated from oil-filled motor housing for ease of field maintenance
  • Dynamically balanced two-vane non-clogging impeller with pump-out vanes to protect seal
  • UL listed

Technical Specifications:

  • Horsepower: 1 HP
  • Maximum flow rate : 160 GPM @ 10'
  • Maximum Head: 35'
  • Solids handling (dia.): 2"
  • Max Liquid Temp: 140F
  • Discharge: 3" FNPT
  • Cord Length: 20'
  • Voltage: 380-460 V
  • Hertz: 60 Hz
  • Amps: 3 A
  • Watts: 1300 W
  • Weight: 90 lbs.
  • Height: 17.2"
  • Width: 9.9"
  • Length: 14.1"


  • 2 years manufacturers warranty from the date of purchase.


Product Specs
Amperage: 11
Application: Sewage
Approvals: UL/CSA
Cord Length: 20 ft
Dimensions: 17.2"H x 14.1"L x 9.9"W
Discharge: 3"
Features: Three-phase
Flow at 10 FT Head: 160 GPM
Flow at 15 FT Head: 130 GPM
Flow at 5 FT Head: 180 GPM
Horse Power: 1
Max Pressure (PSI): 15.1
Shutoff Head (ft.): 35
Solids Size: 2"
Type: Manual
Voltage: 380v
Wattage: 1900
Weight (lbs): 94 lbs
There are no reviews for this product.

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: