Manual High Temperature Sump/Effluent Pump w/ 15' cord, 1/2HP, 115V

Manual High Temperature Sump/Effluent Pump w/ 15' cord, 1/2HP, 115V
Manual High Temperature Sump/Effluent Pump w/ 15' cord, 1/2HP, 115V QR Code
Views: 1118 Product Code: 511610
UPC: 010121116009

MPN: 511610

Weight:38.00 lb

Usually ships: 5-7 business days
Qty: Add to Cart

Have any questions?
Contact us at 1-800-246-9552

The 511610 from Little Giant is a Manual High Temperature Sump/Effluent Pump w/ 15' cord, 1/2HP, 115V. Recommended for applications such as boiler blowdown pits, plant washdown units, public utility underground transformer vaults and industrial steam cleaning pits. HT-10E Series Effluent Pump is suitable for pumping basement drainage water, effluent, wastewater and other non-explosive, non-corrosive, non-abrasive liquids with up to 3/4" spherical solids handling ability, with a wide use in residential, commercial, industrial and agricultural applications with light to medium transfer demands.

The Eliminator submersible HT-10E Series De-watering and Effluent Pump features a vertical 1 1/2" FNPT discharge with head capacity of 24', high-temperature thermoplastic base and heat resistant float. HT-10E-CIM Eliminator Submersible Effluent Pump handles liquids up to 3/4" diameter soft solid waste materials and deals with tough effluent and demanding tasks in wastewater and effluent waste transfer with high efficiency and long-term dependability. Little Giant HT-10E-CIM has an epoxy coated cast iron housing and cover to ensure rust resistance, with all exposed component parts made of corrosion resistant materials to provide a longer service life.

Little Giant HT-10E-CIM boasts Vortex nylon impeller, maximum 200F operating temperature, mechanical seals (stainless steel spring, carbon and ni-resist faces, Viton parts and Shaft seal) and 300 Series stainless steel Hardware. Oil filled motor housing of HT-10E-CIM provides lifetime lubrication and rapid heat dissipation. Little Giant's powerful 1/2 HP Split Phase motor with automatic reset thermal overload protection delivers 80 GPM of wastewater at 5' total dynamic head. This newest HT-10E-CIM Eliminator High-Temperature Effluent Pump is an ideal solution for effluent and wastewater removal and handling where such materials must be moved upward from a collection area to sewer or septic lines or drainage areas.


  • 1/2 HP Split Phase motor with overload protection
  • Designed for continuous duty
  • Handles liquids up to 200F
  • 3/4" solids handling capability
  • Cast iron pump housing with protective epoxy coating for corrosion resistance
  • Oil-filled motor housing for lifetime lubrication and rapid heat dissipation
  • Stainless steel screws, bolts and lifting ring to protect against corrosion
  • Mechanical seals (stainless steel spring, Carbon and Ni-Resist faces, Viton Shaft seal) to assure maximum protection against pump failure
  • Bearings: Upper and lower ball bearings for extended motor life
  • 1 1/2" FNPT Discharge
  • CSA listed

Technical Specifications:

  • Motor: 1/2 HP Split Phase
  • Maximum flow rate: 80 GPM @ 5'
  • Maximum Head: 24'
  • Solids handling (dia.): 3/4"
  • Max Liquid Temp: 200F
  • Discharge: 1 1/2" FNPT
  • Cord Length: 25'
  • Voltage:115 V
  • Hertz: 60 Hz
  • Amps: 10.5 A
  • Watts: 900 W
  • Weight: 38 lbs.
  • Height: 10.25"
  • Width: 9.13"
  • Length: 9.6"


  • 1 year manufacturers warranty from the date of purchase.


Product Specs
Amps:10.5 A
Cord Length:25'
Discharge:1 1/2" FNPT
Max Liquid Temp:200F
Maximum flow rate:80 GPM @ 5'
Maximum Head:24'
Motor:1/2 HP Split Phase
Solids handling (dia.):3/4"
Voltage:115 V;</li>60 Hz
Watts:900 W
Weight:38 lbs.
There are no reviews for this product.

Write a review

Your Name:

Your Review:Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: