Liberty Pumps SX54=3-161 3 Phase SX Series Simplex Pump Control w/ Wide Angle Float Switch, 20" Cord  (4 - 6.3 Amp; 575V)

Liberty Pumps SX54=3-161 3 Phase SX Series Simplex Pump Control w/ Wide Angle Float Switch, 20" Cord (4 - 6.3 Amp; 575V)

Liberty Pumps SX54=3-161 3 Phase SX Series Simplex Pump Control w/ Wide Angle Float Switch, 20" Cord  (4 - 6.3 Amp; 575V) QR Code
QR-Code
Product Code: SX54=3-161 UPC: 671812116700

Availability: Out Of Stock

Weight:19.00 lb



Usually ships: Upon availability
$1,117.00
Qty: Add to Cart

Have any questions?
Contact us at 1-800-246-9552

The Liberty Pump SX54=3-161 is a 575V, 3 Phase, 4.0-6.3 Amp, Simplex Pump Control panel with start/run capacitors in a NEMA 4X Enclosure. This Liberty control panel was designed to provide a reliable means of controlling simplex pump systems in residential or commercial installations. The Liberty SX54=3-161 is most commonly used in sump basins, effluent or sewage pump chambers and lift stations. The NEMA 4X - ultraviolet stabilized thermoplastic enclosure is for outdoor or indoor use. The Liberty SX54=3-161 consists of a control panel and 3-pilot-duty float switches. The floats control the pump stop, start and high level alarm functions. The Control Panel is equipped with thermal overload protection and a multi-tap transformer to provide control voltage. Motor protective switch provides adjustable overload, branch circuit protection and pump disconnect.

 

Liberty Simplex Pump Control Panels boast magnetic motor contactor to control the pump by switching hot electrical lines and a sized to application circuit breaker to provide overload protection. The Liberty SX54=3-161 utilizes horn and red light indicator, designed to be activated when an alarm condition occurs. HOA (hand-off-automatic) Switch offers either hand, off or automatic operations. In the hand mode, the pump will not turn on unless other safety features are employed. In the automatic mode, the pump will turn on from commands by the float switches. The Liberty SX54=3-161 Pump Control Panel features pump input power and pump connection terminal block, ground lug, auxiliary contacts. Available with many other options and must be ordered with the proper amp rating matching that of the pump.


Features:

  • Across-the-line magnetic contactor;
  • Test/Auto switch;
  • Terminal block for easy wiring;
  • Circuit breaker;
  • Green pump run indicator light (internal);
  • Red alarm indicator light/audible alarm;
  • Auxilary Contacts;
  • Alarm silence and test switches;
  • UL/C-UL listed;

Technical Specifications:

  • Full Load: 4.0 - 6.3 amps;
  • Cord Length: 20';
  • Voltage: 575V;
  • Hertz: 50/60 Hz;
  • Phase: 3;
  • Enclosure: NEMA 4X;
  • CABLE: flexible 18 gauge, 2 conductor;
  • FLOAT: High impact PVC (140 degrees F. maximum fluid temperature);
  • Weight: 19 lbs;
  • Height: 12";
  • Width: 10";
  • Length: 6";
Product Specs
Amperage:4.0 - 6.3 amps
Enclosure Type:NEMA-4X
Height (Inches):12
Length (Inches):6"
Phase:3
Product Type:Simplex Pump Control
Series:SX-Series
Voltage:575v
Width (Inches):10"
There are no reviews for this product.

Write a review

Your Name:


Your Review:Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Loading...
Loading...
Loading...