Honeywell SV9510K2539 24 Vac, Slow Opening Smart Gas Valve (1/2" NPT x 1/2" NPT)

Honeywell SV9510K2539 24 Vac, Slow Opening Smart Gas Valve (1/2" NPT x 1/2" NPT)

Honeywell SV9510K2539 24 Vac, Slow Opening Smart Gas Valve (1/2" NPT x 1/2" NPT) QR Code
QR-Code
Product Code: SV9510K2539 UPC: 85267297714

Availability: In Stock

Weight:2.20 lb

Dimensions (L x W x H ): 7.00 x 6.00 x 4.00

Usually ships: 1 business days
$192.95
Qty: Add to Cart

Have any questions?
Contact us at 1-800-246-9552

The SmartValve System Controls combine gas flow control and electronic direct main burner ignition sequencing functions into a single unit. The ignition source is 120V hot surface igniter lighting the main burner flame. Provides all gas ignition safety functions by controlling gas flow, ignition source, and a 120 Vac combustion air blower. The control also monitors the appliance airflow proving switch circuit and limit string to assure proper appliance operation. The SmartValve System Controls provide prepurge, postpurge and timed trial for ignition with multiple ignition trials and auto reset from lockout. Diagnostic LED indicates system status.


Features:

  • The control communicates directly with the ST9160 Electronic Fan Timer (EFT) in typical forced warm air furnace applications;
  • It can directly interface with the appropriate power supplies and a system thermostat for additional appliance applications;
  • When controlled directly by a thermostat, the control does not provide a postpurge function, as power to the control is removed when the thermostat call for heat ends;
  • This system is suitable for a wide range of fan-assisted combustion, gas-fired appliances including furnaces, rooftop furnaces, boilers, unit heaters, infrared heaters, water heaters and commercial cooking appliances.

Technical Specifications:

  • Electrical Ratings: 24 Vac;
  • Frequency: 50 Hz; 60 Hz;
  • Flame Failure Response Time: 2 sec @ 5µA;
  • PrePurge: 15 seconds;
  • Ambient Temperature Range: -40°F to +175°F (-40°C to +79°C);
  • Ignition System Type: Direct Hot Surface Ignition;
  • Ignition Sequence: 17/27 seconds;
  • Type of Gas: Natural;
  • Flame Sense: Two Rod;
  • Ignition Trials To Lockout: 4 trials;
  • Ignition Trial Time (sec): 9 seconds;
  • Body Pattern: Straight-through;
  • Opening Characteristics: Slow Opening;
  • Pressure Regulator Setting: 3.5in. wc (0.87 kPa);
  • Pressure Ratings: 1/2 psi (3.5 kPa);
  • Inlet/Outlet Size (in.): 1/2" NPT x 1/2" NPT;
  • Maximum Capacity: 200 ft³/hr (5.7 m³/hr), 150 ft³/hr (4.2 m³/hr) @ 1in. P.D.;
  • Minimum Capacity: 20 ft³/hr (0.6 m³/hr);
  • Dimensions (Width x Height x Length): 3.2" x 4.9" x 4.1" (81mm x 124mm x 104mm);
  • Includes: LP Conversion Kit;
  • Mounting: 0° to 90° in any direction from the upright position of the gas control knob, including vertically;
  • Voltage: Call for heat 24 Vac, 60 Hz;
  • Pressure Tapping: 1/8" - NPT.
Product Specs
Body Pattern:Straight-Through
Fuel Type:Natural Gas
Gas Type:Natural Gas
Ignition Trial Time:9 sec
Ignition Trials to Lockout:4
Ignition Type:Direct Hot Surface Pilot
Inlet Size:1/2"
Outlet Size:1/2"
Replaces:SV9510H2228
Voltage:24v
There are no reviews for this product.

Write a review

Your Name:


Your Review:Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Loading...
Loading...
Loading...