Tjernlund PS1505 Fan Proving Switch

Tjernlund PS1505 Fan Proving Switch

Tjernlund PS1505 Fan Proving Switch QR Code
Product Code: PS1505

Availability: Out Of Stock

Weight:1.50 lb

Dimensions (L x W x H ): 7.00 x 7.00 x 6.00

Usually ships: Upon availability
Qty: Add to Cart

Have any questions?
Contact us at 1-800-246-9552

The PS1505 Fan Prover has been designed to monitor the pressure within the fan housing only. A motor or wheel failure will decrease housing pressure and deactivate the pressure switch thus preventing combustion.

The PS1505 Fan Prover is not a safety control designed to ensure proper draft or to indicate chimney failure. It is the responsibility of the end user to properly maintain the combustion equipment and its chimney or vent. Yearly maintenance and inspection should be conducted by qualified service personnel. Failure to follow such maintenance and inspection procedures may result in generation of toxic carbon monoxide gas.

Technical Specifications:

  • Voltage: 125VA pilot duty @ 24 V AC, 300VA pilot duty @ 115 to 277 V AC, 15 A non-inductive to 277 V AC;
  • Electric Switch: SPST, normally open snap acting contacts;
  • Electric Connectors: #6-32 screw terminals with cup washer;
  • Control Set Point: Nonadjustable
  • Operating Pressure: On increasing vacuum pressure rise, 0.05±0.02” W.C. with diaphragm in vertical position;
  • Maximum Pressure: 1/2 psi;
  • Operating Temperature Range: -40°-190°F;
  • Mounting Position: Diaphragm vertical;
  • Dimensions: 5” (diameter) x 5-1/2” (across mounting bracket) x 3” (hight);
  • Finish: Zinc plated steel.
Product Specs
Diameter (Inches):5"
Finish:Zinc plated steel
Max Pressure:1/2 psi
Mount:Diaphragm Vertical
Operating Temp Range:-400 to 1900 F
Voltage:125vA pilot duty @ 24 volts AC
Warranty:1-Year Limited Warranty
There are no reviews for this product.

Write a review

Your Name:

Your Review:Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: